Need help to log in? Click here to view our online guide

Port of Brisbane declared Freight Precinct

23 Oct 2020 2:15 PM | Administration (Administrator)

During 2019, Department of Transport and Main Roads and Brisbane City Council developed the Port of Brisbane Declared Freight Precinct which allows additional heavy vehicle mass and dimension exemptions for the movement of freight travelling between the Port of Brisbane and key adjacent customer destinations.

The precinct covers all roads in the Lytton, Hemmant and Murarrie areas, east of the Gateway Motorway. See map below.

Transport operators are reminded that you can now apply for a route specific Class 3 permit through the NHVR Portal to access the additional mass and dimension exemptions for the Port of Brisbane Declared Freight Precinct outlined below:


PBS level 2 vehicles above 85 tonnes

  • Maximum 30m length
  • Regulation axle masses
  • PBS level 2 standards of gradeability and pavement horizontal loading are exempt.

Note: PBS standard exemptions only apply to PBS approved vehicles operating under a permit within this Declared Freight Precinct. All PBS standards must be met for any travel on roads outside of a Declared Freight Precinct.

Flat rack and open top freight containers

  • You may carry multiple items
  • Maximum 78.5 tonnes GCM
  • You may use low loader and low loader/dolly combinations
  • Open top containers must have a minimum of 6 meters clear space between the centre line of the rearmost axle of the towing unit or dolly and the foremost axle of the combination's rear axle group
  • Operators must check the Conditions of Operation Database before travelling

Dimension allowancesOperators must comply with all requirements under the Multi-State Class 1 Load Carrying Vehicles Dimension Exemption Notice 2020 (No. 1).

  • You may carry multiple items
  • Maximum of one (1) container per move
  • Item/s must be carried in a way to minimise dimensions
  • A secondary item must not increase a dimension that already exceeds regulation
  • A secondary item must not exceed the length of the flat rack
  • Maximum 4.5m width
  • Maximum 35m length
  • Maximum 5m height
  • If height exceeds 4.6m high, the load must be transported on a trailer with a maximum deck height of 1.2m
  • If a container exceeds 4.3m high and exceeds regulation mass, the load must be transported on a trailer with a maximum deck height of 1.2m
  • Operators must check the Conditions of Operation Database before travelling
Email hv.policy@tmr.qld.gov.au to find out more about the Port of Brisbane Declared Freight Precinct.
         
For the latest information on road closures and traffic conditions across Queensland, visit www.tmr.qld.gov.au and search 'Conditions of Operations Database', visit the QLDTraffic website www.qldtraffic.qld.gov.au, download the QLDTraffic app or phone 13 19 40 for further assistance.

                                                        

Content © 2020 Queensland Trucking Association Ltd
Powered by Wild Apricot Membership Software