---
title: "NSW: Hills M2 Mtwy update"
description: Resurfacing work on the M2 Hills Motorway starts July 26, 2026, affecting traffic and ramp access until late October. Stay informed of detours and restrictions.
---

[News ](https://www.qta.com.au/news)

# [NSW: Hills M2 Mtwy update](https://www.qta.com.au/news/nsw-hills-m2-mtwy-update)

 Written by [Hubspot Author](https://www.qta.com.au/news/author/hubspot-author) | 27 July, 2026

*Source: Transport for NSW *

Transport for NSW advises of resurfacing work on the M2 Hills Motorway will start this **Sunday, 26 July 2026 until late October 2026 **between Windsor Road and the M2 Epping-Norfolk tunnel.  

#### **Works will occur**

- 26 July 2026 until late October 2026 
- **Sunday to Thursday nights between 9pm and 5am **

#### **What to expect**

Previously it was advised of the Beecroft Road westbound off-ramp, however, further traffic condition changes will also be required.

**M2 Motorway width restrictions**

During work hours in August, **vehicles ****wider than 4.4 metres**** will need to be escorted through the site by traffic control.** Operators of these vehicles are required to contact the** M2 Control Room on 02 9086 6400 to advise of travel at least two days** **prior. **

Operators are advised that once pavement work starts in September, over-width vehicles will be required to park on the motorway shoulder until all lanes re-open.

In addition to the above, a reminder that all operators of a vehicle or combination exceeding 3.5 metres wide must contact the M2 operator on [OSOMaccess@transurban.com](mailto:OSOMaccess@transurban.com) at least five working days before travel.

**Ramp closures**

Several westbound on and off ramps will also require periodic closures during some shifts. The following closures and detours will be in place:

- **Pennant Hills Road on-ramp** - detour via Pennant Hills Road, Castle Hill Road, Old Northern Road and Windsor Road on ramp OR Pennant Hills Road, Cumberland Highway and Windsor Road on ramp.
- **Pennant Hills Road off-ramp** - detour via the Windsor Road off-ramp, to James Ruse Drive and Pennant Hills Road.
- **Beecroft Road off-ramp** - detour via Pennant Hills Road off-ramp, Carlingford Road and Beecroft Road.

These detour routes are suitable for all vehicles however due to the nature of the work, specific dates for the ramp closures are not able to be provided in advance. **TfNSW advise that the alternate routes should be included for all permit requests until the end of October.**

#### **Work area**

**  **

#### **For more information ** 

For more information visit [https://www.livetraffic.com/incident-details/280380](https://cst-freightbranchstakeholderengagement.cmail20.com/t/j-l-yduhkkdy-hhijiihutt-y/), download the Live Traffic NSW app, or call **132 701**.

To receive updates direct to your phone, search for ‘Beecroft, M2 Motorway’ in your Live Traffic app, select the incident and click ‘Follow’.

#### **Please note**

Operators of Class 1, 2 and 3 vehicles travelling under a notice must consult their relevant enforceable network map to confirm a suitable approved alternative route.

Vehicles travelling under a permit must not travel off the approved route listed in the permit unless an updated permit is obtained from the National Heavy Vehicle Regulator (NHVR).

[View full post](https://www.qta.com.au/news/nsw-hills-m2-mtwy-update)

```json
{
  "@context" : "http://schema.org",
  "@type" : "BlogPosting",
  "author" : {
    "@type" : "Person",
    "name" : "Hubspot Author"
  },
  "dateModified" : "2026-07-27T00:22:23.981Z",
  "datePublished" : "2026-07-27T00:22:23Z",
  "headline" : "NSW: Hills M2 Mtwy update",
  "image" : {
    "@type" : "ImageObject",
    "height" : 60,
    "url" : "/hs/hsstatic/content_shared_assets/static-1.4092/img/default-amp-logo.png",
    "width" : 60
  },
  "mainEntityOfPage" : "https://www.qta.com.au/news/nsw-hills-m2-mtwy-update",
  "publisher" : {
    "@type" : "Organization",
    "logo" : {
      "@type" : "ImageObject",
      "height" : 60,
      "url" : "/hs/hsstatic/content_shared_assets/static-1.4092/img/default-amp-logo.png",
      "width" : 60
    },
    "name" : "News"
  }
}
```