NSW: Changed traffic conditions on M1 Pacific Motorway southbound at Somersby and Mooney Mooney 

Work will be carried out for up to 5 weeks weather permitting, from 8.30pm to 4am, starting between Somersby and Ourimbah from Sunday 31 May and Mooney Mooney from Monday 1 June.

The slow lane and middle lane of the southbound carriageway will be closed for about 2 km during work hours with traffic using the fast lane.

Traffic control with lane closures and a reduced speed limit of 40 km/h will be in place for the safety of workers and motorists.

Oversize and/or overmass vehicles more than 3.5m wide should call the project team on 0499 563 759 prior to travel to discuss being escorted through the work site. Significant delays may occur if failure to contact.

This work may cause a cumulative delay of up to ten minutes. Motorists are advised to allow extra travel time, drive to these conditions and follow the directions of signs and traffic control.

Location of works

For the latest traffic information, for the work on between Somersby and Ourimbah visit Live Traffic NSW | Incident Details or download the Live Traffic NSW app.

For the latest traffic information for the work on Mooney Mooney visit Live Traffic NSW | Incident Details

To receive updates direct to your phone, search for either ‘Somersby - M1 Pacific Highway Motorway’, or 'Mooney Mooney - M1 Pacific Highway' in your Live Traffic app, select the incident and click ‘Follow’

Please note:

Unless specified otherwise, operators of Class 1,2 & 3 vehicles travelling under a Notice must consult their relevant enforceable network map to confirm a suitable approved alternate route.

Operators of Class 1, 2 & 3 vehicles travelling under a Permit must not travel off the approved route listed in the permit unless an updated permit is obtained from the NHVR.